AQUASUN[7.5 HP][Three Phase Submersible Pump Starter][AS-DOL-ASWT 7.5 HP]
- AQUASUN Starter for 7.5 HP Motor Pump provided with 25 Amps LT type Contactor 4 pole [AC3 Motor Duty] with easy replaceable heavy-duty fixed and moving contacts and Coil Voltage range between 280-480 Volts with easy replacement of coil.
- Thermal Overload Relay ensures Overload Protection and manual reset facility [Range ?13~21 Amps for 7.5 HP Motor Pump]
- AQUASUN Starter is provided with Red, Yellow, and Blue neon bulbs for 3 phase power indication.
- Heavy Bakelite Connectors for easy connection of incoming Power and outgoing Motor supply wires.
- Single Phase Preventer with Auto Restart (AUTO SWITCH) gives ON indication by LED after DELAY time of 30 sec under healthy voltage conditions and gives OFF indication by LED during phase failure, reverse phasing or phase unbalance.
50 in stock
- Starting and Protection of Three-Phase Equipments
- Prevents equipment from Single Phasing,
- Reverse Phasing and Unbalance Supply
- Trip Time delay– 2 to 3 secs for phase reversal & phase unbalance,
- Trip Time delay <1 sec. for single phasing.
- No Separate Auxiliary Supply Required.
- Auto Resetting Mode available.
- Auto manual switch provided for bypass condition (optional)
- Motor and Supply wire directions are given for easy connections.
- Connector terminals for easy connection.
- Best quality panel accessories used for long-life operation.
- CR sheet enclosures, elegant powder coating after pretreatment.
- Every end of the wire is soldered/crimped by terminals to avoid sparking.
- Thread Lockner applied to every nut and bolt to avoid loose contacts.
- Product directly going from Manufacturer to Consumer.
|Horsepower (HP)||7.5 H.P|
|Relay Output (amps)||13~21|
|Warranty||Six months against any manufacturing defect|
Only logged in customers who have purchased this product may leave a review.