AQUASUN[Any HP][Single Phase WATER DRYRUN TIMER][WDT-WC1]

2250

  • Many a time, it happens that, water in the bore well/well aquifer discharge is less than motor pump discharge, and the water
    coming out of the motor pump is not continuous.
  • The motor pump which is submerged in water will give water till it is having sufficient water in the bore well. In case of insufficient
    water (when the water level goes down), then the motor pump runs without giving water which is called dry running of the motor pump.
  • Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time.
  • Our product AQUASUN Water Dry Run Timer prevents the motor pump from dry running and thus subsequent burnout.
  • AQUASUN Water Dry Run Timer can be set at the predetermined time anywhere between 1-60 minutes. Calculate the time taken to by the motor pump when it runs smoothly with sufficient water coming out of the motor pump and set the AQUASUN Water Dry Run Timer just ahead of the time taken by the motor pump to discharge less than actual water from the bore well (insufficient water coming out ).
  • For example, if the motor pump runs smoothly with sufficient water in the bore-well for 25 minutes and after that the motor pump
    discharge is less than actual then set the AQUASUN Water Dry Run Timer at approx 20 minutes which will switch OFF the pump set
    AUTOMATICALLY thus preventing the Motor Pump from Dry Running and subsequent burnout.
  • Thus AQUASUN Water Dry-Run Timer switches OFF the motor pump AUTOMATICALLY as per the set time

50 in stock

SKU: AQUASUN[Any HP][Single Phase WATER DRYRUN TIMER][WDT-WC1] Categories: , Tag:

Description

ADVANTAGES

  • Small device, Saves Water, Electricity and Time.
  • Auto and Manual switch provided for bypass condition also.
  • Easy to install in all kinds of Overhead & Underground tanks including water coolers.
  • LED Indicator for water full (green) & water empty (red).
  • NO maintenance is required.
  • Solid-state PCB inside.
  • NO sensors are required.
  • NO extra cost of wires is required to connect the pump control panel to the tank.
  • Prevents damage to roofs and walls from overflowing water
  • Product directly going from Manufacturer to Consumer.

APPLICATION

For Our products are ideally suitable for water supply in houses, bungalows, offices, hospitals, factories, hotels & restaurants, apartments, multistory buildings, commercial centers and all places with Overhead/Underground water tanks.

Please raise your query of product through our email id: info@indiacitymart.com or helpline no: 9039034433

Technical Specifications

Product Features

Colour IVORY
Dimensions (L X B X H)mm 102mm*35m*81mm
Weight (gms) 1500 gms
Voltage (volts) 3 Phase, 415 VAC, 50Hz
Relay Output (amps) One Change Over (1 NO) and 5 amps@ 230 VAC/ 28 VDC resistive load
Connection Diagram YES
Mounting Panel mounting /Screw type
Material ABS Electrical Grade Plastic Molded
Quality Control Govt. C.P.R.I. Bhopal Tested and Certified
Packing Box 3 layer Corrugated
Warranty Six months against any manufacturing defect

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.